This pack has been approved by the specialized electrical installers . It meets all standards securit ed in force and good practice indicated in the technical guide for the design and development of EVRI (Charging Infrastructure for Electric Vehicles ).
Mini 25x20cm charging station, connected, and adjustable power designed for home or office parking
WALLBOX Copper SB single-phase charging station Wallbox Copper - 1.4 to 7.4kW - Bluetooth - Wi-Fi - T2S connects 220V single phase. Its load current is instantaneously adjustable, anytime between 6A and 32A via the Wallbox application. It can therefore accommodate the available power of your home. His grip T2S lockable front will ensure a Secure charging in your electric car in Mode 3 .
With the Application Wallbox , you can connect your charging station to your Smartphone with Bluetooth or wifi. The application will allow you to manage the following settings:
Enable / Off remote load
Adjust load power between 1.4 and 7.4kW
Schedule the load the desired slots (to recharge in peak hours, for example)
Review Historical consumption and the total cost of electricity consumed
Enable Plug & amp; Play or RFID card
The charging station operates in Plug & Charge or RFID card choice . Plug & Charge as soon as you connect the cable to your vehicle and the charging station, charging begins. If you activate the RFID fashion Web portal Wallbox, then only RFID cards included with the Wallbox can activate the load.
7km (to 1,4kW) at 35km (to 7.4kW) more runtime per hour of charging.
Wallbox Copper SP with shutter socket (Type 2S) is one of the smaller charging stations market. Discreet, lightweight and convenient. Size L19xH26xP9 cm. It is also robust (IK 08) and is resistant to heavy rain (IP 55). It can be installed outside without protection against rain.
Enable Plug & Charge or RFID card - your choice - adjustable on Wallbox web portal
Setting the charging intensity between 6 and 32A, adjustable via App
Connect via Bluetooth and WiFi: access to Wallbox App and Web Portal Wallbox
No Current Sense leak CC
Terminal block for flexible (and not rigid) cable. The station can only be connected with flexible cable
IP55 protection and IK08: resistant to heavy rain and shocks
Plug: Type 2S. Socket with safety shutter
Wall mounting kit included
The following electrical safety devices are required, and are to be installed on a dedicated line. They were approved by electricians , and comply with French regulations.
CarPlug team has successfully tested the Copper charging station. The charging station is surprising for its small size. The opening of the cover for connecting the cable was a bit tedious, we must watch the installation video Youtube for it. Then the connection was a breeze. Connect the phase, neutral and earth. Connection to electrical protection, and start up.
The charging station turns on quickly, and is ready to load in about 1 minute. We downloaded the app Wallbox, registered serial number and PUK code, and the connection is made without problem. We then plugged the cable: charging has started all alone to the intensity set to the application. If you change the intensity of the application, the load current changes instantly on the car.
Review: Very positive. ideal charging station for a garage or a house for someone wishing to follow its consumption, manage charging slots, and sometimes change the charging current.
Installation Wallbox quick charging station Copper SB
ALFEN concrete base EVE dual - AFN-833829300-ICU
Compatible with all electric cars
Compatibility 1 PHASE 16A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A:BMW I3 60Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Citoën e-Jumpy, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner Tepee, Peugeot e-Partner,Renault Twizy, Skoda Citigo e iV, Volkswagen e-Up, Bolloré Bluesummer
Compatibility 1 PHASE 32A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi R8 e-tron, BMW iX3, Citoën ë-C4, Fiat 500e, Hyundai Ioniq, Hyundai Kona, Honda-e, Jaguar I-Pace, KIA Soul , KIA Niro, KIA e-soul, Lexus UX 300e, Mazda MX-30, Mercedes e-Vito, Mercedes e-Sprinter, Nissan Leaf 2018, Nissan E-NV200, Opel Ampera , Opel Mokka-e, Peugeot e-2008, Renault Master Z.E, Renault Kangoo Z.E, Smart ForFour EQ, Skoda Citigo e iV, Volkswagen e-Golf, Volkswagen I.D 3
Compatibility 3 PHASES 16A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 3 phases 16A: BMW I3 94Ah, BMW I3 120Ah, Citroën ë-C4, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, DS DS3 Crossback e-Tense, Fiat 500e, Ford Mustang Mach-E, Mercedes B250e, Mercedes EQC, Mini Cooper SE, Opel Corsa-e, Skoda Enyaq, Tesla Model 3, Tesla Model Y, Tesla Cybertruck, Volkswagen ID.3, Volkswagen ID.4, Volvo XC40
Compatibility 3 PHASES 32A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi e-tron sportback, Audi e-tron, Mercedes Classe B Elec. Drive, Mercedes Classe B Elec. Drive, Peugeot e-2008, Peugeot e-208, Renault Zoe, Renault Zoé "Nouvelle", Renault Fluence Ze, Smart For Two Elec Drive EQ, Tesla Model S, Tesla Model X
L191 x H259 mm x P88,5
2.3 to 7.4 kW - Adjustable, 7.4 kW
Configurable between 6A and 32A (1A increment)
Mode of loading
Leakage current detection
Oui - 6mA
Integrated circuit breaker
consumption monitoring via the App Wallbox
Three phase, Single phase
Communication & Access
Wifi, Bluetooth and Wifi - Management via App Wallbox
RFID card, Plug & Play
Protections and Temperatures
IP55 - withstands rain
IK08 - very good impact resistance
-25 ° C to + 45 ° C
Wall (supplied kit)
Standards and guidelines
IEC61851-1 - IEC61851-22
A question to choose your terminal?
Need advice on our products?
Contact our specialists, available from Monday to Friday from 9 am to 6 pm
Despite the current circumstances, CARPLUG remains open and operational