This pack has been approved by the specialized electrical installers . It meets all safety standards in force and good practice indicated in the technical guide for the design and development of EVRI (Charging Infrastructure for Electric Vehicles) .
WALLBOX charging station Wallbox Copper SB Shutter - 1.4 to 22kW - Bluetooth - WiFi - ref. CPB1-W-2-4-4-002-A , can be connected in one phase or three phases. Its load current is instantaneously adjustable, anytime between 6A and 32A via the Wallbox application. It can therefore accommodate the available power of your home. His grip T2S will assure you a front lockable Secure charging in your electric car in Mode 3 .
With the Application Wallbox , you can connect your terminal to your Smartphone with Bluetooth or wifi. The application will allow you to manage the following settings:
Enable / Off remote load
Adjust load power between 1.4 and 22kW
Schedule the load the desired slots (to recharge in peak hours, for example)
Review Historical consumption and the total cost of electricity consumed
Enable Plug & Play RFID card or
The terminal operates in Plug & Play or RFID card choice . Plug and Play, as soon as you connect the cable to your vehicle and the terminal, charging begins. If you activate the RFID fashion Web portal Wallbox, then only RFID cards included with the Wallbox can activate the load.
7km (to 1,4kW) to 100km (to 22kW) more runtime per hour of charging.
Wallbox Copper SB with socket with shutter is one of the smaller charging stations market. Discreet, lightweight and convenient. Size L19xH26xP9 cm. It is also robust (IK 08) and is resistant to heavy rain (IP 55). It can be installed outside without protection against rain.
Enable Plug & Play RFID card or - optionally - Adjustable Web portal Wallbox
Setting the charging intensity between 6 and 32A, adjustable via App
Connect via Bluetooth and WiFi: access to Wallbox App and Web Portal Wallbox
Log-phase or three-phase
CC Leakage detector 6mA
Terminal block for rigid cables 10mm²
IP55 protection and IK08: resistant to heavy rain and shocks
Plug: Type 2S. Socket with safety shutter
Wall mounting kit included
The following electrical safety devices are required, and are to be installed on a dedicated line. They were validated by electricians and experts EVRI, and comply with French regulations.
Protections to install if single phase connection:
CarPlug team has successfully tested the Copper terminal. The terminal is surprising for its small size. The opening of the cover for connecting the cable was a bit tedious, we must watch the installation video Youtube for it. Then the connection was a breeze. Connect the phase, neutral and earth. Connection to electrical protection, and start up.
The terminal turns on quickly, and is ready to load in about 1 minute. We downloaded the app Wallbox, registered serial number and PUK code, and the connection is made without problem. We then plugged the cable: charging has started all alone to the intensity set to the application. If you change the intensity of the application, the load current changes instantly on the car.
Review: Very positive. ideal terminal for a garage or a house for someone wishing to follow its consumption, manage charging slots, and sometimes change the charging current.