Video tutorials :
Pakck WALLBOX Mini charging station Copper SB - 1.4 to 22kW - Bluetooth - Wifi - RFID + Load Management Module + Circuit Protection +cable is compound the following sections:
This pack has been approved by the specialized electrical installers . It meets all safety standards in force and good practice indicated in the technical guide for the design and development of EVRI (Charging Infrastructure for Electric Vehicles) .
WALLBOX charging station Wallbox Copper SB Shutter - 1.4 to 22kW - Bluetooth - WiFi - ref. CPB1-W-2-4-4-002-A , connects in single or three phase. Its load current is instantaneously adjustable, anytime between 6A and 32A via the Wallbox application. It can therefore accommodate the available power of your home. His grip T2S will assure you a front lockable Secure charging in your electric car in Mode 3 .
With the Application Wallbox , you can connect your terminal to your Smartphone with Bluetooth or wifi. The application will allow you to manage the following settings:
The terminal operates in Plug & Play or RFID card choice . Plug and Play, as soon as you connect the cable to your vehicle and the terminal, charging begins. If you activate the RFID fashion Web portal Wallbox, then only RFID cards included with the Wallbox can activate the load.
7km (to 1,4kW) to 100km (to 22kW) more runtime per hour of charging.
Wallbox Copper SB is one of the smaller charging stations market. Discreet, lightweight and convenient. Size L19xH26xP9 cm. It is also robust (IK 08) and is resistant to heavy rain (IP 55). It can be installed outside without protection against rain.
The following electrical safety devices are required, and are to be installed on a dedicated line. They were validated by electricians and experts EVRI, and comply with French regulations.
Protections to install if single phase connection:
Protections to install if three-phase connection:
CarPlug team has successfully tested the Copper terminal. The terminal is surprising for its small size. The opening of the cover for connecting the cable was a bit tedious, we must watch the installation video Youtube for it. Then the connection was a breeze. Connect the phase, neutral and earth. Connection to electrical protection, and start up.
The terminal turns on quickly, and is ready to load in about 1 minute. We downloaded the app Wallbox, registered serial number and PUK code, and the connection is made without problem. We then plugged the cable: charging has started all alone to the intensity set to the application. If you change the intensity of the application, the load current changes instantly on the car.
Review: Very positive. ideal terminal for a garage or a house for someone wishing to follow its consumption, manage charging slots, and sometimes change the charging current.
|Detailed title||Pack Borne de recharge WALLBOX - 1,4 à 22kW - Bluetooth - Wifi - RFID - Module de gestion de charge + Protections électriques|
|Vehicle compatibility||Compatible with all electric cars|
|Compatibility 1 PHASE 16A||Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A:BMW I3 60Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Citoën e-Jumpy, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner Tepee, Peugeot e-Partner,Renault Twizy, Skoda Citigo e iV, Volkswagen e-Up, Bolloré Bluesummer|
|Compatibility 1 PHASE 32A||Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi R8 e-tron, BMW iX3, Citoën ë-C4, Fiat 500e, Hyundai Ioniq, Hyundai Kona, Honda-e, Jaguar I-Pace, KIA Soul , KIA Niro, KIA e-soul, Lexus UX 300e, Mazda MX-30, Mercedes e-Vito, Mercedes e-Sprinter, Nissan Leaf 2018, Nissan E-NV200, Opel Ampera , Opel Mokka-e, Peugeot e-2008, Renault Master Z.E, Renault Kangoo Z.E, Smart ForFour EQ, Skoda Citigo e iV, Volkswagen e-Golf, Volkswagen I.D 3|
|Compatibility 3 PHASES 16A||Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 3 phases 16A: BMW I3 94Ah, BMW I3 120Ah, Citroën ë-C4, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, DS DS3 Crossback e-Tense, Fiat 500e, Ford Mustang Mach-E, Mercedes B250e, Mercedes EQC, Mini Cooper SE, Opel Corsa-e, Skoda Enyaq, Tesla Model 3, Tesla Model Y, Tesla Cybertruck, Volkswagen ID.3, Volkswagen ID.4, Volvo XC40|
|Compatibility 3 PHASES 32A||Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi e-tron sportback, Audi e-tron, Mercedes Classe B Elec. Drive, Mercedes Classe B Elec. Drive, Peugeot e-2008, Peugeot e-208, Renault Zoe, Renault Zoé "Nouvelle", Renault Fluence Ze, Smart For Two Elec Drive EQ, Tesla Model S, Tesla Model X|
|Dimensions||L191 x H259 mm x P88,5|
|Charge socket||Type 2S|
|Charge power||22 kW, 7.4 kW, 3 to 22 kW - Adjustable, 11 kW, 3.7 kW|
|Voltage||230V to 400V - Adjustable|
|Charge current||Configurable between 6A and 32A (1A increment)|
|Mode of loading||mode 3|
|Leakage current detection||Oui - 6mA|
|Integrated circuit breaker||No|
|Energy meter||consumption monitoring via the App Wallbox|
Communication & Access
|Communication module||Bluetooth and Wifi - Management via App Wallbox|
Protections and Temperatures
|Sealing||IP55 - withstands rain|
|Impact resistance||IK08 - very good impact resistance|
|Operating temperature||-25 ° C to + 45 ° C|
|Mounting||Wall (supplied kit)|
|Câblage||10 mm² - conformément à la réglementation et aux normes en vigueur|
|Standards and guidelines||IEC61851-1 - IEC61851-22|
A question to choose your terminal?
Need advice on our products?
Contact our specialists, available from Monday to Friday from 9 am to 6 pm
Despite the current circumstances, CARPLUG remains open and operational
03 67 10 41 41
Datas sheets :
Your specialist for your terminal projects
Need help? Contact our technical support
For advice on your projects
We are available from Monday to Friday from 9:00 to 18:00