This pack has been approved by the specialized electrical installers . It meets all standards securit ed in force and good practice indicated in the technical guide for the design and development of EVRI (Charging Infrastructure for Electric Vehicles ). This pack also meets the criteria ZE Ready .
An ideal charging station for a business park or public
Simple charging station Alfen Eve Mini 904460036 - Type 2 with shutter - 3.7 to 22kW 16 / 32A - Adjustable - 2G RFID MID is ideal for car business within or outside (IP54) or public car park . This charging station will allow you to enjoy your EV through a system reload Mode 3 (IEC61851 ), simple, reliable and fast.
Load power adjustable 3.7kW 22kW single-phase or three-phase via the Alfen software, which allows to adapt the charging station to the available power of the installation.
The function " Auto Recovery " allows, in case of power failure, overheating or failure of the RCD, to take charge as soon as the power is restored.
Eve Mini charging station can be set based on your need: access free access RFID card , or access paid .
A request for access to Alfen software is to make the part of the installer. Once your application is approved, you will have access to your charging station management software that will allow you to add new RFID access cards, or modify the power of the charging station between 3.7 and 22kW. he connection between the PC and charging station is possible either by Ethernet cable (easiest) or via 2G SIM.
CarPlug team can prepare the charging station according to your wishes: power, RFID cards to encode.
The 2G modem allows remote connection to a backend software CCMA, which can activate and manage a mobile charging station for a RFID cards on the market.
Up to 100km more runtime per charge time (if charging to 22kW).
Activation: (Plug & amp; Play), or RFID card or mobile (PlugSurfing)
Modem 2G: for connection to any software backend CCMA market
Recharge intensity adjustment between 1 and 32A via software
The following electrical protection are required and are installed on a dedicated line . They were approved by electricians , and respect the current French regulations:
Type A differential switch 40A 30mA - included in the pack
40A circuit breaker C curve - included in the pack
Shunt trip 230 / 415V (required for ZE Ready) - included in the pack
Type of adjustable activation choice: free access, RFID card access or access via smartphone
Protected color LCD display indicating the state of charge and the instantaneous power
RJ45 Ethernet interface to connect with a PC: power control and addition / removal of RFID cards
SIM 2G interface to connect with a remote PC power control and addition / removal of RFID cards
Paid access to the charging station with the Mycarplug software
Paid access by RFID card or mobile app
This option allows you to make your charging station available to everyone thanks to theMyCarplug management software, RFID card or app, fix the resale price of your electricity, and automatically receive payments on your account. You can also encode RFID cards in the software to create free access. It is useful if you do not know who will take care of your charging station. Online access to themanagement software will be provided when purchasing. More information about thepaid access via RFID or App card.
Other advantages of the charging station Alfen Eve mini
Alfen - a reference mark
ALFEN is a Dutch company listed on the Amsterdam stock exchange, which manufactures charging stations since 2011. The brand has become internationally recognized for its charging stations, which are synonymous with robustness, reliability and ease of use .
Compatibility with all electric cars
Charging station Alfen Eve Mini meets European standards and is compatible with all electric vehicles. Its handling is of type 2. Manufacturers typically provide with a charging cable with a type 2 connector to the charging station. If this is not the case, you will find charging cables type 2 in the categoryCharging Cables .
Load up to 10 times faster than on a simple domestic plug.
Configurable Power Recharge
Adjust the power load to your installation. The load power is adjustable between 3.7 and 22 kW with downloadable ICU charging station software, software available on the website Alfen.
Resume automatic load
The "auto recovery" function allows, in case of power failure, overheating or failure of the RCD, to take charge as soon as the power is restored.
Alfen Eve mini charging station is certified ISO9001 and CE and complies with all European directives on safety. The charging station blocks the cable during the charging, and releases it only when the charging session is done
In addition, the charging station has a DC leakage detector, and therefore it becomes unnecessary to install expensive upstream type B RCD. A conventional differential type A is enough.
charging station Network Management Alfen
Alfen Eve mini charging station can be easily integrated into the network, connecting each charging station by Ethernet cable to a switch. Depending on the need, each charging station can be configured as master or slave via the ICU software Alfen. The management software into the charging station also secures maximum instantaneous consumption for all charging stations, and thus avoid blowing the breaker when all charging stations are in charge.
Internet Connection 2G
The charging station Alfen EVE has a 2G GSM mobile radio module can be operated with backend software compatible with OCPP protocol (Open Charge Point Protocol). CarPlug offers its own backend software,mycarplug. If you choose "Pay by RFID card or APP" then CarPlug provide you with charging station integrated SIM card and online access to the management software.
Enable RFID card
A RFID reader is built into the charging station. If you choose the RFID card access option or paid access via RFID card or App then the charging station stays locked and is not activated unless a valid RFID card is swiped at the reader. To stop charging, the user must pass his card again to the reader. Registration of new RFID cards can be done via the ICU software Alfen, or via the management software .
Alfen Eve mini charging stations are equipped with an energy meter certified MID, complies with European calibration. Therefore, you can legally bill back energy indicated by this counter, without risk of legal problems.
Strength and leakage
Alfen charging station, with its index of protection IP54 and IK10, weatherproof and shockproof and suitable for indoor or outdoor use. Its protective cover of composite material reinforced with glass fiber is highly resistant to impacts and faces vandalism.
Customizable LED Display
The charging station LED multicolor screen Alfen Eve tells you optimally on the charge status, as well as the total consumption of your vehicle charge termination. Your company logo can be displayed on the screen. To do so, simply contact our customer service.
Alfen ICU EZ: charging station management software Alfen
ALFEN charging station 904460036 Eve Mini - Type 2 - shutter - 3.7 to 22kW 16 / 32A - Adjustable - 2G, RFID
Compatible with all electric cars
Compatibility 1 PHASE 16A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A:BMW I3 60Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Citoën e-Jumpy, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner Tepee, Peugeot e-Partner,Renault Twizy, Skoda Citigo e iV, Volkswagen e-Up, Bolloré Bluesummer
Compatibility 1 PHASE 32A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi R8 e-tron, BMW iX3, Citoën ë-C4, Fiat 500e, Hyundai Ioniq, Hyundai Kona, Honda-e, Jaguar I-Pace, KIA Soul , KIA Niro, KIA e-soul, Lexus UX 300e, Mazda MX-30, Mercedes e-Vito, Mercedes e-Sprinter, Nissan Leaf 2018, Nissan E-NV200, Opel Ampera , Opel Mokka-e, Peugeot e-2008, Renault Master Z.E, Renault Kangoo Z.E, Smart ForFour EQ, Skoda Citigo e iV, Volkswagen e-Golf, Volkswagen I.D 3
Compatibility 3 PHASES 16A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 3 phases 16A: BMW I3 94Ah, BMW I3 120Ah, Citroën ë-C4, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, DS DS3 Crossback e-Tense, Fiat 500e, Ford Mustang Mach-E, Mercedes B250e, Mercedes EQC, Mini Cooper SE, Opel Corsa-e, Skoda Enyaq, Tesla Model 3, Tesla Model Y, Tesla Cybertruck, Volkswagen ID.3, Volkswagen ID.4, Volvo XC40
Compatibility 3 PHASES 32A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A: Audi e-tron sportback, Audi e-tron, Mercedes Classe B Elec. Drive, Mercedes Classe B Elec. Drive, Peugeot e-2008, Peugeot e-208, Renault Zoe, Renault Zoé "Nouvelle", Renault Fluence Ze, Smart For Two Elec Drive EQ, Tesla Model S, Tesla Model X
Traffic white (RAL 9016)
L240 x H370 x P130 mm
From 2.3 to 22 kW - Adjustable
230V to 400V - Adjustable
Configurable between 10A and 32A
Mode of loading
Leakage current detection
Integrated circuit breaker
Integrated circuit breaker 40A
integrated and certified KWh Meter MID
Communication & Access
LED Headband three color LCD
Ethernet RJ45, 3G
RFID card, Plug & Play, Paying
Protections and Temperatures
IP54 - withstands rain
IK10 - excellent impact resistance
-25 ° C to + 40 ° C, humidity 95% max
Wall mounting (kit supplied) or post (optional)
wall, On stand
Standards and guidelines
Guidelines and certifications: CE, The provisions of the low voltage directive 2014/35 / EU, The provisions of the EMC guideline 2014/30 / EU, IEC 61851-1 (2010) - Electric vehicle conductive charging system, General requirements NEN-EN -IEC 61851-1: 2011
A question to choose your terminal?
Need advice on our products?
Contact our specialists, available from Monday to Friday from 9 am to 6 pm
Despite the current circumstances, CARPLUG remains open and operational