The BESEN Mobile charging terminal - Type1 - 2,3KW - 6m - 10A single phase - BS-PCD018 is a charging cable - mobile charger that allows you to charge your electric vehicle in mode 2 on any domestic 220V outlet at a power of load of 2.3 KW (10A single phase).
The BESEN mobile terminal allows you to charge any 220V household outlet safely. The charging current is limited to 10A, which avoids any risk of overheating. There is no button. Simply connect it to the car side (type 2) and the home side, and charging starts automatically.
Compatible with all models of electric cars or plug-in hybrids type 1, the mobile charging station for business and private charges your vehiclesafely and gives you the confidence to hit the road every morning with a full battery, no matter how where you are.
The terminal connects only in single-phase 220VAC.
No installation required. The terminal is Plug & Play: one plugs in and charging starts automatically.
10km of extra autonomy per hour of recharge.
• Plug & Play • No installation required. Works on any domestic outlet • Charging power limited to 2.3kW (10A single phase) • Total length: 6m • Indicator light indicating the state of charge • Overcurrent, overvoltage and short-circuit protection • Cable dimensions: 16A 3G2.5 + 2 x 0.75mm • Double shell: metal bollard and flexible material cladding • IP65: Water resistant • Operating temperature: -25°C to + 55°C • CE certificate
The automatic Type 1 Pedestal Lock protects your BESEN BS-PCD018 charger against theft during and after the charging process.
The Besen mobile charging station does not require any special installation. simply plug it into a standard 220V household outlet (type e).
The secure Green'up Access LEGRAND plug included in the pack
The Green'up outlet is a 230V - 14A single phase safety plug specially designed for electric car charging. Thanks to Legrand Green'up technology, it automatically triggers the maximum power and guarantees fast and secure charging in mode 2. It will charge at 13A or 14A against 8 or 10A for a standard socket.It has been designed for daily recharging, with no risk of overheating as opposed to a standard plug.
It is suitable for individuals and professionals, for indoors and outdoors. A protective flap protects it against water and dust.
You can replace the existing outlet of your garage with this one to load faster. In addition, a standard plug is not designed to work at maximum power daily. That's why it is important to install a reinforced plug like the Greenup in the case of a daily recharge.
• Safety: Automatic limitation of charging current according to the connection cable • Fast charging: charge up to 14A (instead of 8 or 10A for a standard plug) • Silver contacts for fast charging • A magnet located under the socket allows it to be detected by the charging cable, and thus to raise the charge amperage up to 14A • IP66 and IK07: suitable for outdoor or indoor parking. Resistant to shocks and rain • Fixing: protruding • Plastic material • Plug with flap • Supplied with a cable gland • Differential circuit breaker not supplied
Electrical protection and installation
• Connection from the board by a dedicated line, with cable of 3 x 2.5 mm² • Differential switch 30mA type A / HI 20A (eg HAG-BDH240F). Not included. • Circuit breaker 20A curve C PdC 6kA (ex: HAG-MJT720). Not included • Lightning protection is recommended • Installation between 80cm and 120cm from the ground
Gain of 16km of autonomy per hour of recharge.
Test taken Green'up on Tesla Model S - 13A reached
Carplug has tested the Green'up plug in its premises, with a Tesla S and Tesla charging cable in mode 2. Charging works and can go up to 13A. Note that the load did not start on standard 220V outlets of our premises.
The Legrand 20A 1P + N - TypeF - 30mA circuit breaker is essential for any terminal installation.
It has a function of both differential switch and circuit breaker.As a differential switch, it will compare the input current with the output current, and cut the circuit if the difference is greater than 30mA.This function protects people against electric shock.As a circuit breaker, it will protect the installation against overvoltages and short circuits.
This LEGRAND 410754 differential switch is compatible with all single phase terminals on the market that have a charging current between 1 and 16A.
Type F (Hpi) Single phase 230V 20A 30 mA sensitivity Complies with standards NF EN 61009-1, NF EN 60898-1 and EN 60947-2