Warning ! Charging station without guarantee and only for Belgium
Charging station Keba P30 KeContact serie c type 2 is ideal for house Garage , or Parking business within or outside (IP54). This charging station will allow you to enjoy your EV through a system reload Mode 3 (IEC61851 ), simple, reliable and fast.
The current load adjustable 10A, 13A, 16A , 20A, 24A or 32A phase or phase , which allows to adapt the charging station to the available power of the installation. The power load can vary from 3.7 22 kW .
charging station Keba is to protect against overloads, short circuits, insulation faults due to a type of differential A to be placed in the switchboard . A continuous leakage current detector integrated DC makes the installation of an expensive differential type B optional.
Compatible with all models of electric cars or Plug-in Hybrid , charging station business and especially support your car any security and offers insurance to hit the road every morning with a battery full.
Enjoy the exclusive comfort of a charging station electric charging at home or office, with a reload 10x faster than with a conventional socket, with CarPlug 1 solutions reload for electric cars for individuals and professionals.
Installing and configuring the charging station P30 Keba c-series
CarPlug team configures and tests all charging stations before delivery. A simplified installation guide will be provided with the delivery. This way, be sure that the charging station will be easy to install and will work well.
Your charging station will be configured depending on the option. This option will be changed later.
Any charging station installation must be performed by a certified electrician.
Options Keba charging station P30 c-series
Your charging station is Plug & amp mode; Play. Once a car is connected, the charging starts automatically. More informartions the charging station to free access .
Access RFID card
Your charging station is always locked and charging is permitted only when passing a valid RFID card on the reader of the charging station. If you buy the RFID cards CarPlug with the charging station, they will already be set and will activate your charging station. It is also possible to add yourself any RFID card by suite.Plus information about the RFID card access.
paid access by RFID card or Mobile Application
This is possible only if the series Keba c is linked to a series Keba x RJ45 cable. In this case, the charging station C can header uses remotely connected via charging station x.
This option allows you to make your charging station available to everyone, thanks to MyCarplug management software, RFID card or app, fix the resale price of your electricity, and automatically receive payments on your account. You can also encode cards RFID in the software to create free access. It is useful if you do not know who will take care of your charging station. Online access to the management software you will be provided purchase. More information on paid access card or RFID App .
charging station Advantages Keba P30 KeContact c-series
Keba - a quality brand
KEBA is an Austrian company based in Linz which manufactures for 50 years solutions in the field of automation. Since 2009, KEBA has sold smart charging stations that are suitable for all electric vehicles, and has become a reference in the field.
Compatibility with all electric cars
Keba charging station meets European standards and is compatible with all electric vehicles. Its handling is of type 2. Manufacturers typically provide with a charging cable with a type 2 connector to the charging station. If this is not the case, you will find charging cables type 2 in the category charging cables for electric cars .
Load up to 10 times faster than on a simple domestic plug.
Configurable Power Recharge
Adjust the power load to your installation. The load power is adjustable between 3.7 and 22 kW through DIP SWITCH switches. These switches can set the charging current to the following amperages: 10A, 13A, 16A, 20A, 24A or 32A
Resume automatic load
"auto recovery" allows, in case of power failure, overheating or failure of the RCD, to take charge as soon as the power is restored.
Keba charging station P30 is CE and ISO9001 and complies with all European directives on safety. The charging station blocks the cable during the charging, and releases it only when the charging session is done
In addition, the charging station has a DC leakage detector, and therefore it becomes unnecessary to install expensive upstream type B RCD. A conventional differential type A is enough.
The KEBA charging station P30 serves charging station c "slave" and needs a charging station series x "master" to be managed remotely KEBA P30 SERIES X . A total of x serial charging station can handle up to 15 series c charging stations. The management software into the series x charging stationssecures maximum instantaneous consumption for all charging stations, and thus avoid blowing the breaker when all charging stations are in charge.
LAN connection only (no SIM card, no 3G)
The series c KEBA communicates only by RJ45 Ethernet cable to be connected to a Keba x or switch for remote management. A Keba c needs a Keba x to be controlled remotely. There's no 3G or Wifi on Keba c.
Enable RFID card
A RFID reader is built into the charging station. If you choose the RFID card access option or paid access via RFID card or App then the charging station stays locked and is not activated unless a valid RFID card is swiped at the reader. To stop charging, the user must pass his card again to the reader. Registration of new RFID cards can be done via the internal Keba software to the charging station, or via the management software mycarplug .
P30 KEBA charging stations are equipped with a certified energy meter MID, complies with European calibration. Therefore, you can legally bill back energy indicated by this counter, without risk of legal problems.
Resistance and sealing
IP54 KEBA charging station and IK08 weatherproof and impact resistance and is suitable for indoor or outdoor use.
KEBA charging station Wallbox 102637 KeContact P30 - c-series - Type2 - 22kW 3.7 to 16/32 - adjustable - RFID MID - KC-P30-ES2400G2-M0R
Compatible with all electric cars
-30 ° C to + 50 ° C
L240 x H495 x P163 mm
From 2.3 to 22 kW - Adjustable, 7.4 kW, 22 kW, 3.7 kW, 11 kW
230V to 400V - Adjustable, 400V, 230
Configurable 10A, 13A, 16A, 20A or 32A
Mode of loading
Leakage current detection
Integrated circuit breaker
integrated and certified KWh Meter MID
Communication & Access
LED Headband three color LCD
RJ45 Ethernet, USB. Slave Station to be managed by a master Station x-serie when accessed remotely.
RFID card, Paying, Plug & Play
Protections and Temperatures
IP54 - withstands rain
IK08 - very good impact resistance
-25 ° C to + 40 ° C, humidity 95% max
Wall mounting (kit supplied) or post (optional)
wall, On stand
Standards and guidelines
Guidelines and certifications: EC, 2004/108 / EC, 2006/95 / EC, 1999/5 / EC R & TTE Directive, 2011/65 / EU | Standards: EN 61851-1, EN 61851-22, EN 62196-1, EN 62196-2, EN 61439-1, EN 61439-7 E DIN, EN 61000-6-1, EN 61000-6-3, EN 50581 : 2012 (RoHS-RL) R
1 charging station + 1 wall mounting kit + 1 user guide
A question to choose your terminal?
Need advice on our products?
Contact our specialists, available from Monday to Friday from 9 am to 6 pm