An ideal adjustable power charging station for the company
Wallbox charging station Keba KeContact P30 series RFID-b connects single-phase or three phase, with an adjustable intensity between 10A and 32A. It can therefore accommodate the available power of your business or home. His grip T2S lockable front will ensure a Secure charging in your electric car in Mode 3 .
Sher power load is adjustable between 2.3 and 22kW , using Dipswitches buttons inside the charging station, editable easily.
The wide adjustable power charging station Keba b RFID and its activation mode RFID card, make it a point that also fit well in a parking lot of a home than a business parking lot .
The function"auto recovery" allows, in case of power failure, overheating or failure of the RCD, to take charge as soon as the power is restored.
TheRFID card reader allows activation of the charging station only if passage a previously encoded RFID card. This avoids the use of the charging station by a third party. Encoding is done very easily by connecting an RJ45 Ethernet cable to the charging station. If you buy the charging station and RFID cards on CarPlug, then we already'll encode all the cards for you. There will be more to plug the charging station.
Master RFID card will be provided and will allow you to encode any other RFID card in the future: you pass the Master card on the reader, and in 3s after you pass another RFID card your choice (eg a supermarket card, entry badge, ...). This new card will enable or disable your charging station now.
Up to 100km more runtime per charge time (if charging to 22kW).
Activation: (Plug & amp; Play) or RFID card choice. Adjustable on the charging station using the DIP SWITCH
Setting the charging current to 10A, 13A, 16A, 20A, 24A or 32A
The following electrical safety devices are required, and are to be installed on a dedicated line, with cable section 2,5mm² is 20A circuit breaker, and 10mm² if 40A circuit breaker. They were approved by electricians , and respect the current French regulations:
Type A differential switch 40A 30mA (type B is not required for KEBA) (eg HAGER BDH440F) - not included
Circuit breaker 16A to 40A Curve C (depending on the setting of the charging station) (eg HAGER NGT840 40A) - not included
Shunt trip 230 / 415V (required for the ZE Ready) (eg, HAGER MZ203 ) - not included
Two types of possible activation:
Open access: you plug and the charging starts automatically
Access by RFID card: only No. encoded cards activate the charging station. Adding cards can easily by connecting a PC to the charging station over Ethernet.
LED Headband indicating charge status and LCD display indicating power consumption
RJ45 Ethernet interface to connect with a PC: Technical parameter setting and adding / removing RFID cards
KEBA charging station Wallbox 98137 KeContact P30 - b-series - Type2S - Shutter - 22kW 3.7 to 16/32 - adjustable - RFID, KEBA Station charging station Wallbox 98137 KeContact P30 - b-series - Type2S - Shutter - 22kW 3.7 to 16/32 - adjustable - RFID
Compatibility 1 PHASE 16A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A: BMW I3 60Ah, Citroën Berlingo, Citroën C-Zero, Citroën E-Mehari, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner
Compatibility 1 PHASE 32A
Compatible 1 phase 32A: Hyundai Kona, Ioniq Electrique, Jaguar I-Pace, KIA Niro, Soul , Mercedes Vito, Nissan E-NV200, Nissan Leaf 2018, Opel Ampera , Range Rover 400e, Renault Kangoo Z.E, Master Z.E, Volkswagen e-Golf
Compatibility 3 PHASES 16A
Compatible with models 3 phases 16A: BMW I3 120Ah, BMW I3 94Ah, Mercedes B250e, Tesla Model 3
Compatibility 3 PHASES 32A
Compatible with models 3 phases 32A: Audi e-tron sportback, Renault Fluence, Renault Zoe, Smart Two for Two, Tesla Model S, Tesla Model X
-30 ° C to + 50 ° C
L240 x H495 x P163 mm
From 2.3 to 22 kW - Adjustable
230V to 400V - Adjustable
Configurable 10A, 13A, 16A, 20A or 32A
Mode of loading
Leakage current detection
Integrated circuit breaker
Counter integrated KWh
Communication & Access
LED Headband three color LCD
RJ45 Ethernet port and USB port, RJ45 Ethernet, USB
RFID card, Plug & Play
Protections and Temperatures
IP54 - withstands rain
IK08 - very good impact resistance
-25 ° C to + 40 ° C, humidity 95% max
Wall mounting (kit supplied) or post (optional)
wall, On stand
Standards and guidelines
Guidelines and certifications: EC, 2004/108 / EC, 2006/95 / EC, 1999/5 / EC R & TTE Directive, 2011/65 / EU | Standards: EN 61851-1, EN 61851-22, EN 62196-1, EN 62196-2, EN 61439-1, EN 61439-7 E DIN, EN 61000-6-1, EN 61000-6-3, EN 50581 : 2012 (RoHS-RL) R
A question to choose your terminal?
Need advice on our products?
Contact our specialists, available from Monday to Friday from 9 am to 6 pm