An adjustable-phase charging station HAGER 2,3-7kW access by RFID card ideal for co-ownership or office parking
Charging station Hager Witty XEV201 is designed to be installed on a collective garage wall or office spaces, covered or sheltered. His grip lockable T2S side will ensure a safe charging of your electric car in mode 3.
The power load is adjustable between 2,3 and 7,4kW with a potentiometer inside the charging station, and the charging station can adapt to all single phase domestic electrical installations.The Adjustable Power allows you to adjust the power depending on the available power of the system.
The charging station connects only single phase 220VAC .
The charging station is turned through Card RFID we pass the card in front of the front drive of the charging station to activate the load. To turn off the load or you pass the card again to the reader, or one stops charging via the vehicle. 4 cards already programmed are provided with the charging station, one administrator card.
Gain 40km (to 7kW) autonomy per hour of charging.
Adjustable power of 2,3 to 7.4 kW
Single Phase 220V 32A Electrical
adjustable load current between 10A and 32A (10, 13, 16, 20, 25 or 32) by potentiometer. Thus the power can vary from 2,3 to 7,4kW
Enable RFID card: 4 cards provided with 1 Admin card
integrated cable reel on the rear part
Integrated Record Storage Bin
Double Hull: metal charging station and covering of flexible material
Introducing the HAGER Witty charging station XEV201
Installation of the load power management module to a charging station HAGER Witty XEV201
Compatible with all electric cars
Compatibility 1 PHASE 16A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A:BMW I3 60Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner Tepee, Peugeot Partner, Volkswagen e-Up, Bolloré Bluesummer
Compatibility 1 PHASE 32A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 32A:Audi R8 e-tron, Hyundai Ioniq Electrique, Hyundai Kona, Jaguar I-Pace, KIA Soul , KIA Niro, KIA e-soul, KIA e-soul, Mercedes e-Vito, Nissan Leaf be. 2018, Nissan Leaf af. 2018, Nissan E-NV200, Nissan E-NV200 Evalia, Nissan E-NV200 Evalia, Opel Ampera , Peugeot e-2008, Peugeot e-208, Renault Master Z.E, Renault Kangoo Z.E, Volkswagen e-Golf, Volkswagen I.D 3, Honda Honda-e
Compatibility 3 PHASES 16A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 3 phases 32A: BMW I3 94Ah, BMW I3 120Ah, Citroën C-Zero, Citroën E-Mehari, Citroën Berlingo, Mercedes B250e, Opel Corsa-e, Tesla Model 3, Tesla Model Y, Tesla Cybertruck, Volkswagen I.D 3
Compatibility 3 PHASES 32A
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A: Audi e-tron sportback, Audi e-tron, Mercedes Classe B Elec. Drive, Mercedes Classe B Elec. Drive, Peugeot e-2008, Peugeot e-208, Renault Zoe, Renault Zoé "Nouvelle", Renault Fluence Ze, Smart For Two Elec Drive EQ, Tesla Model S, Tesla Model X
-30 ° C to + 50 ° C
L34,6 x H48 x cm P23,3
Metal clad of a flexible material
2.3 to 7.4 kW - Adjustable
Configurable 6, 10, 13, 16, 20, 25 or 32A
Mode of loading
Leakage current detection
Communication & Access
LED Headband 3 colors for the charge states
Protections and Temperatures
IP54 - withstands rain
IK10 - excellent impact resistance
From -30 ° C to + 50 ° C
Wall mounting (kit supplied) or post (optional)
Standards and guidelines
CE, IEC 6185, IEC 62196-2
A question to choose your terminal?
Need advice on our products?
Contact our specialists, available from Monday to Friday from 9 am to 6 pm
Despite the current circumstances, CARPLUG remains open and operational