A perfect French charging station HAGER for home or business, adjustable from 3,0 to 22kW
Charging station Hager Witty XEV100 find its place on the wall of your garage or business parking. Its side lockable plug T2S will ensure a safe charging of your electric car mode 3.
The power load is adjustable between 3,0 and 22kW with a potentiometer inside the charging station. It can be connected in single or three phase and thus adapt to all electrical installations. The Adjustable Power allows you to adjust the power depending on the available power of the system.
The charging station is also compatible with automatic load shedding system via ICT (Information TV customer), and with a delayed start system or time switch. It can therefore adapt its power load depending on your installation.
It does not DC leakage current sensor and therefore require has an upstream type B breaker.
Gain 8km (to 3,0kW) to 100km (to 22kW) autonomy per hour of charging.
Plug & Play
Charging current setting between 13A and 32A by potentiometer
The following electrical protection are required and are installed on a dedicated line , with cable section 2,5mm² is 20A circuit breaker, and 10mm² if 40A circuit breaker. They were approved by electricians , and respect the current French regulations:
Compatible with all Type 1 and Type 2 rechargeable electric and hybrid cars 1 phase 16A: BMW I3 60Ah, Citroën Berlingo, Citroën C-Zero, Citroën E-Mehari, Mitsubishi i-MiEV, Peugeot Ion, Peugeot Partner
Compatibility 1 PHASE 32A
Compatible 1 phase 32A: Hyundai Kona, Ioniq Electrique, Jaguar I-Pace, KIA Niro, Soul , Mercedes Vito, Nissan E-NV200, Nissan Leaf 2018, Opel Ampera , Range Rover 400e, Renault Kangoo Z.E, Master Z.E, Volkswagen e-Golf
Compatibility 3 PHASES 16A
Compatible with models 3 phases 16A: BMW I3 120Ah, BMW I3 94Ah, Mercedes B250e, Tesla Model 3
Compatibility 3 PHASES 32A
Compatible with models 3 phases 32A: Audi e-tron sportback, Renault Fluence, Renault Zoe, Smart Two for Two, Tesla Model S, Tesla Model X
-30 ° C to + 50 ° C
L34,6 x H48 x cm P23,3
Metal clad of a flexible material
3 to 22 kW - Adjustable
230V to 400V - Adjustable
Configurable 6, 10, 13, 16, 20, 25 or 32A
Mode of loading
Leakage current detection
Communication & Access
LED Headband 3 colors for the charge states
Plug & Play
Protections and Temperatures
IP54 - withstands rain
IK10 - excellent impact resistance
From -30 ° C to + 50 ° C
Wall mounting (kit supplied) or post (optional)
Standards and guidelines
CE, IEC 6185, IEC 62196-2
A question to choose your terminal?
Need advice on our products?
Contact our specialists, available from Monday to Friday from 9 am to 6 pm
Despite the current circumstances, CARPLUG remains open and operational